To place an order or for further information please call ALL Supplies LLC at (630) 518-2632

www.allsuppliesllc.com

Vinyl Warning and Marking Tape

PRODUCT NUMBERS/SPECIFICATIONS                                             

SST-718 (18 Yd.) & SST-736 (36 Yd.)
7 mil (0.175mm) Conformable Soft PVC Vinyl - Synthetic Rubber Adhesive, self-extinguishing. Adhesion: 30 oz/in. Tensile Strength: 18 lbs/inch - Elongation: 160% at break. Temperature Resistance: -20°F to +176°F. Will not corrode copper, brass, steel, or aluminum. For striping & warning, marking of hazardous areas and exits to comply with OSHA requirements per paragraph 1910.144 of the Federal Register. 3" Neutral Core.

 

TYPICAL USES:

Black / Yellow    =   Physical Hazard / Caution
Red / White        =   Fire Equipment / First Aid
Black / White     =   Traffic / Housekeeping
Green / White    =   Decorative Identification

 

                 

18YD (54') 

Black/Yellow, Red/White & Black/White
WIDTH RLS/CS
1/2" 12.5mm 96
3/4" 19mm 64
1" 25mm 48
2" 50mm 24
3" 75mm 16
4" 100mm 12
6" 150mm 8
48" 1230mm LOG
48" 1230mm  

36 YD (108') 

Black/Yellow, Red/White & Black/White Green/White
1/2" 12.5mm 96
3/4" 19mm 64
1" 25mm 48
2" 50mm 24
3" 75mm 16
4" 100mm 12
6" 150mm 8
48" 1230mm LOG
49" 1250mm 2
48" 1230mm 40
Alternative to 3M #5700 and #5702
     

 

SST-918L (18 Yd.) & SST-936L (36 Yd.)

9 mil (0.22mm). Laminated PVC. 6 mil film. 2 mil over-lamination. 0.78 mil Rubber Base Adhesive. Shiny surface. Adhesion/Steel: 17 oz/inch. Tensile Strength: 20 lb/in. Elongation: 120%. Resists oil, grease, solvents, moisture. Scuff resistant. For marking fire equipment/exits, hazardous areas, and first aid points. 3" Neutral Core.

COLORS:

18 & 36 Yd... Black/Yellow, Red/White, Black/White

18 Yd Only...  Magenta/Yellow (for Radiation Hazards)

 

           
18YD (54')
1" 25mm 48
2" 50mm 24
3" 75mm 16
4" 100mm 12
6" 150mm 8
49" 1250mm 2

36 YD (108')
1" 25mm 48
2" 50mm 24
3" 75mm 16
4" 100mm 12
6" 150mm 8
49" 1250mm 2

Vinyl Electroplating Tape

PRODUCT NUMBER / SPECIFICATIONS

EPT-36... Vinyl Electroplating Tape

Extremely conformable, durable and highly resistant to oil, acid, alkalines and corrosive chemicals. Excellent adhesion to metals and plastics. Meets Government Specifications H-H-T-0025, Amendment 2. Color: Cream. 3" Neutral Core / Carton.

Applications:

Used as a masking tape in electroplating operations. Designed for use with PCB terminal zone contacts to prevent penetration of chemicals during plating process; as a protection tape for shot peening applications.

Specifications:

Backing
Adhesive
Total Thickness
Adhesion
Tensile Strength
Elongation
Operating temperature

Soft PVC (non-rigid vinyl)
Rubber Based
6.5 mil (0.16mm)
30 oz/inch
25 lbs/inch
200% at break
176°F (80°C) *

 

                   

36 YD (33M) 108'
1/2" 12.5mm 96
3/4" 19mm 64
1" 25mm 48
1-1/2" 38mm 32
2" 50mm 24
3" 75mm 16
41" 1041mm LOG
Alternative to Permacel #P-35; 3M #470;Patco #W1550
*NOTE:

Do NOT peel off until temperature cools down to 140 deg. F to 158 deg. F (60 to 70 degrees Celsius)

-3-

Industrial Tape Index
Page 2

Page 4