To place an order or for further information please call ALL Supplies LLC at (630) 518-2632

www.allsuppliesllc.com

Vinyl Electrical Insulating Tape

PRODUCT NUMBERS/SPECIFICATIONS                                             

EL8AW-L
All Weather - Flame Retardant and Cold Resistant 8 mil (0.20MM) Black PVC Electrical Insulation Tape with Synthetic Rubber Adhesive. Adhesion: 18 oz/inch - Dielectric Strength: 1100 V/mil. Dielectric Breakdown: 10,000V - Tensile: 21 lb/inch. Elongation:  250%. Temp. range: -10C to 80C.  Individually cello-wrapped and labeled. 1-1/2" (38.1MM) UL362K Listed Core.
WIDTH X LENGTH RLS/CS
3/4" (19mm) X 66' 250
Also sold in sub-packs of 10 rolls.
       
EL85AW66-L

All Weather - Flame Retardant and Cold Resistant 8.5 mil (0.22MM) Black PVC Electrical Insulation Tape, matte finish, non-corrosive adhesive. Adhesion: 18 oz/in. Dielectric Strength: 1100 V/mil.  Dielectric Breakdown: 10,000V. Tensile: 21 lb/inch. Elongation:  250%. Temp. range: -10 C to 80C. Individually cello-wrapped & labeled.  Meets specifications MIL-I-24391C.  1 1/2 (38.1mm) UL362K listed core.
3/4" (19mm) x 66' 100
48" (1230mm) x 66' LOG
       
EL85AW66-B

All Weather - Flame Retardant and Cold Resistant 8.5 mil (0.22MM) Black PVC Electrical Insulation Tape.  Same specifications as above.  These special widths are slit to order, and are bulk packed, separated by silicone sheets.  1 1/2 (38.1mm) UL362K listed core.
1/2" (12mm) x 66' 288
1" (25mm) x 66' 144
1 1/2" (38mm) 96
2" (50mm) x 66' 72
3" (75mm) x 66' 48

 Vinyl Harness Wrap Tape

EL5-HW...

5 mil (0.127mm) Black SPVC Film with Rubber Based Adhesive.  For wrapping of harness wires.  High elongation and conformability.  Dielectric strength: 1100 V/mil.  Dielectric breakdown: 5500 V.  Tensile strength: 11 lbs/in.  Adhesion: 14 oz/in.  Unwind force: 25 oz/in.  Elongation: 200%.  Cello-wrapped and bulk packed.  1 1/2" (38.1mm) core.
3/4" x 66' 200

Friction Tape

CFT-15...

15mil (0.35mm) Friction Tape - Black Cotton Cloth with no-corrosive Rubber Resin Adhesive.  Its cloth backing makes this tape easily hand-tearable and extremely conformable.  Highly resistant to humidity and galvanic corrosion.  Holds tightly on rough and irregular surfaces, its adhesive system will not dry out.  Used for insulation and to protect industrial harnesses and electrical wires from physical damage caused by friction, for over wrapping low voltage splices and general electrical maintenance jobs.  Dielectric strength: 1,000 V. Insulation class: 80C.  Tensile strength 42 lbs/in.  Elongation: 8%.  Individually cello-wrapped (no label) - 10 rolls per tube sleeve.
3/4" x 60' 100
1 1/2" x 60' 50
2" x 60' 40
3/4" x 82.5' 50

-5-

Industrial Tape Index
Page 4

Page 6