To place an order or for further information please call ALL Supplies LLC at (630) 518-2632
www.allsuppliesllc.comGlass Cloth Tape / Thermal Spray Masking Tape
PRODUCT NUMBERS/SPECIFICATIONS
| GC-SH7... Glass Cloth / Silicone Adhesive 7.2 mil - Electrical Grade Glass Cloth with Silicone Adhesive. Formulated to meet MIL-I-19166C, Type 7 MIL. Conformable; chemical and solvent resistant; printable. Used for insulation of electrical apparatus in military equipment, for sealing and bundling of non-electrical applications where flame retardancy or high heat resistance is required; coil armor wrap. Thermosetting; properties increase with additional curing heat (3 hrs @ 500°F) - Adhesion: 35 oz/inch - Tensile Strength: 150 lbs/inch. Elongation: 5%. Dielectric Strength: 900 Volts. 180°C Class H. Temperature Performance Range: -100°F to 500°F. Meets UL-510 Flame Retardancy Test. Color: Natural White. 3" Core. |
|
|||||||||||||||||||||||||||||||
| GC-SH10 Glass Cloth / Silicone Adhesive 10 mil - A tightly woven Electrical Grade Glass Cloth coated with a Partially Cured Silicone Adhesive system to provide maximum chemical and solvent resistance. Formulated to meet MIL-I-19166C, Type 10 MIL. Used for soft cell insulation, phase insulation in integral HP motors, high temperature harness wrapping, flame retardant coil armor wrap, banding heavy conductor coils. An excellent all-purpose tape capable of resisting moderate grit blasting. Thermosetting; properties increase with additional curing heat (3 hrs @ 500°F). Adhesion: 40 oz/inch. Tensile Strength: 175 lbs/inch. Elongation: 5%. Dielectric Strength: 4000 Volts. Electrolytic Corrosion Factor: 1.0. Insulation Resistance: 250 megohms - 180°C Class H. Temperature Performance Range: -75°F to 500°F. Meets UL-510 Flame Retardancy Test. Color: Natural White. 3" Core. |
|
|||||||||||||||||||||||||||||||
| GC-RB7 Glass Cloth / Thermosetting Rubber
Adh. 7.0 mil - A high tensile woven Electrical Grade Glass Cloth coated with a high tack, high adhesion, Thermosetting Rubber Resin Adhesive system to provide maximum solvent resistance and limit adhesive softening. Its high tack and adhesion level resists flagging. For insulating connections, banding heavy conductor coils, harness and coil wrapping, barrier insulation, anchoring lead wires. Abrasion resistant to reduce damage to wires. Not recommended for use above 130°C Class B insulation. Adhesion: 44 oz/inch. Tensile Strength: 170 lbs/inch. Elongation: 8%. Dielectric Strength: 2000 Volts. Temperature Performance Range: 3 hrs @ 250°F, 2 hrs @ 275°F, 1 hr @ 300°F. Meets Gov't Specification MIL-T-4053B and MIL-I-15126, Type GFT; UL-510 flame retardancy test. Color: Natural White. 3" Core. |
|
|||||||||||||||||||||||||||||||
| GC-SA7 Aluminum / Glass Cloth Laminate 7.0 mil - A Laminate of Dead Soft Aluminum Foil and Glass Cloth. The glass cloth side is coated with a transparent high temperature Silicone Adhesive. Conformable, heat resistant and highly reflective. Withstands moderate grit blasting. Non-corrosive; flame retardant (will not burn under open flame exposure). Used as a masking tape in plasma spray applications. Prevents build-up of liquid metal on surfaces that must be protected. Used for seaming & repair of heat and flame barrier curtains; protecting/shielding various missile and aircraft components such as control cables, harnesses, fuel lines, etc.; securing thermal insulation on heating and ventilation ducts. Adhesion to Panel: 40 oz/inch. Adhesion to Backing: 30 oz/inch. Unwind Force: 10 oz/inch. Tensile Strength: 120 lbs/inch. Elongation: 10%. - Sustained Temperature Resistance: 500°F. Meets Gov't Specification MIL-T-83284, McDonnell Douglas Spec. STM 0683, Martin Marietta Spec. STM J505. Color: Aluminum. 3" Core. |
|
|||||||||||||||||||||||||||||||
Double Coated Glass Cloth Tape
| DC-GCL...Glass Cloth
3.4 mil (0.086mm) Glass Cloth, coated on both sides with a high temperature silicone adhesive. Total thickness: 7.2 mil (0.183mm). Siliconized heavy-duty crepe paper release liner. Tensile: 125 lbs/in. Adhesion to steel: 30oz/in. Elongation: 5%. Dielectric strength: 6400V. Operating temperature: -100F to 500F. Used to laminate rubber to other substrates for die-cutting into high temperature gaskets. Also used as a primary mask that allows over-wrap of another material (such as rubber, high density vinyl, etc.) for a heavy-duty combination in plasma spray masking or grit blasting operations; to join metals in high temp. applications. 3" neutral core. |
|
-26-
| Page 25 |