6.0 mil (0.15mm) exclusive of liner. 4 mil high quality saturated crepe paper coated on both sides with a medium tack, high shear synthetic rubber based adhesive.  White siliconized paper release liner.  Good adhesion to a variety of surfaces with excellent repositionability characteristics.  Suitable for general purpose bonding applications.  Special adhesive formulation makes this tape excellent for holding wood cuts and dies with little to no residue upon removal.  Also works well for mounting golf club grip handles.  General purpose bonding of papers, films, fabrics, etc.  Adhesion: 60 oz/in.  Holding power: 4000 minutes.  Tack (in.): 1.5.  Tensile strength: 21 lbs/in.  Elongation: 7% at break.  Application temperature: 60F to 120F.  Temperature range: 0F to 180F.

8.0 mil (0.20mm) exclusive of liner. 6 mil high quality saturated crepe paper, coated on both sides with a high tack, high shear synthetic rubber based adhesive.  Tape is wound on a 3.2 mil super calendared, white siliconized paper release liner.  Used for core start-ups, splicing, holding, joining, attaching, mounting and laminating where high shear and high tack are required.  Good tack on irregular surfaces.  Works well in holding wood cuts and dies.  Suitable for mounting rubber or plastic printing plates.  Adhesion: 110 oz/in. width.  Elongation: 7% at break.  Application temperature: 60F to 120F.  Temperature range: -5F to 180F.