To place an order or for further information please call ALL Supplies LLC at (630) 518-2632

www.allsuppliesllc.com

Double Coated Tissue Tapes...

PRODUCT NUMBERS/SPECIFICATIONS                                             

DC-1210 TISSUE 

4.2 mil (0.108MM) exclusive of liner 1.8 mil non-woven tissue substrate, coated on both sides with an aggressive synthetic rubber Adhesive. White siliconized paper liner. Adhesion: 73 oz/in. - Tensile: 3.4 lbs/inch - Temperature Resistance: 60°F to 120°F application; -0°F to 180°F operating. Excellent quick stick & peel strength. Good for flying splice or static splicing where intense heat is not required. Excellent for nameplates, trophies, core start-ups; laminating cork, cloth or
felt; splicing papers, textiles, plastics. 3" Neutral Core/Carton.
60yd (55M)
WIDTH RLS/CS
3/8" 9mm 96
1/2" 12mm 72
3/4" 19mm 48
1" 25mm 36
1 1/2" 38mm 24
2" 50mm 18
3" 75mm 12
4" 100mm 12
40" 1000mm LOG
Alternative to Tesa #4903; Int'l Tape #207; Venture #520; 3M #406; Adchem #262T, Cantech
       
DC-1215 TISSUE

6.2 mil (0.156MM) exclusive of liner - 1.8 mil Tissue substrate coated on each side with 2.2 mils of high grade hot melt Rubber Adhesive. White Siliconized Paper Liner. Easy-tear with high quick-stick, high adhesion, and excellent aging
properties - HIGH PERFORMANCE - Adheres to nearly all materials, with superior performance on rough and irregular surfaces due to its heavy adhesive disposition. Adhesion: 92 oz/inch - Tensile Strength: 3.4 lbs/inch -
Elongation: 6%. An excellent all-around double coated tape for splicing and laminating difficult to adhere substrates, when high temperature resistance is not a requirement. 3" Neutral Core/Carton.

55yd (50M)
3/8" 9mm 96
1/2" 12mm 72
3/4" 19mm 48
1" 25mm 36
1 1/2" 38mm 24
2" 50mm 18
3" 75mm 12
4" 100mm 12
40" 1000mm LOG

110yd (100M)
3/8" 9mm 96
1/2" 12mm 72
3/4" 19mm 48
1" 25mm 36
1 1/2" 38mm 24
2" 50mm 18
3" 75mm 12
40" 1000mm LOG
        
DC-4210VS TISSUE

4.0 mil (0.10MM) exclusive of liner - 0.5 mil Non-woven Tissue coated on both sides with a highly cured modified Acrylic Adhesive. Brown Siliconized Paper Liner. Peel Adhesion: 48 oz/inch - Shear Resistance: 22 lbs/inch².
Temperature Resistance: -40°F to +250°F Continuous (up to +390°F Short Term). Good direct & durable adhesive strength, good dynamic & static shear resistance with no plasticizer migration on most surfaces. Good water / water - vapor, temperature, UV and aging resistance. Moderate resistance to chemicals (should be tested).
Excellent corrugators' splicing tape; made specifically for corrugated, heavy paper and film splicing. 3" Neutral Core.

55yd (50M)
3/8" 9mm 96
1/2" 12mm 72
3/4" 19mm 48
1" 25mm 36
1 1/2" 38mm 24
2" 50mm 18
3" 75mm 12
4" 100mm 12
40" 1000mm LOG
 

110yd (100M)
3/8" 9mm 96
1/2" 12mm 72
3/4" 19mm 48
1" 25mm 36
1 1/2" 38mm 24
2" 50mm 18
3" 75mm 12
40" 1000mm LOG
Alternative to Tesa #4959 & #7158; Compac #855; Venture #585; Shurtape #DF-633; Scapa #5711.
       
DC-4215SL

6.0 mil (0.15mm) exclusive of liner - 0.5 mil Non-woven Tissue coated on both sides with a highly cured modified Acrylic Adhesive. Brown Siliconized Paper liner. Peel Adhesion: 52 oz/inch - Shear Resistance: 18 lbs/inch².
Temperature Resistance: -40°F to +250°F Continuous (up to +390°F Short Term). Has similar adhesive system as DC-4210VS but with superior conformability to irregular surfaces due to its heavy adhesive disposition. Designed for heavy-duty splicing and permanent holding, with excellent performance on smooth or rough surfaces. Used for splicing heavy paper or vinyl (such as wallpaper), attaching metal or plastic parts, etc. 3" Neutral Core/Carton.

36yd (33M)
3/8" 9mm 96
1/2" 12mm 72
3/4" 19mm 48
1" 25mm 36
1 1/2" 38mm 24
2" 50mm 18
3" 75mm 12
40" 1000mm LOG
 

60yd (55M)
1/2" 12mm 72
3/4" 19mm 48
1" 25mm 36
1 1/2" 38mm 24
2" 50mm 18
3" 75mm 12
40" 1000mm LOG
Alternative to Tesa #4962.

-47-

Industrial Tape Index
Page 46

Page 48